Kyocera TASKalfa 181 181/221 Operation Guide Rev-2 - Page 145

Printing Functions Other Settings You can set the following items for other settings. • Form Feed Timeout • Received Data Dump • Printer Function Resetting • Resource Protect Mode • Auto Continue • Duplex Printing Error Detection • Stapling Error Detection • Service Status Page Printing How to Display the Others Screen Ready GO CANCEL MENU Menu RAM Disk Mode Paper Handling Others 5 1 Press the Print key. 2 Press U or V to select MENU, and then press the Enter key. 3 Press U or V to select Others, and then press the Enter key. The Others screen is displayed. Next, perform the setting referring to the following description of each setting item. Form Feed Timeout If this machine does not receive any information indicating the end of data after receiving the last data, the machine waits for a certain time without printing the last page. When the preset time elapses, the machine performs automatically a form feed. If you set the time to 0, the machine does not perform a form feed until GO is manually selected. 1 Display the Others screen. (See How to Display the Others Screen on page 5-45.) Others Back Form Feed Time-Out Print HEX -DUMP 2 Press U or V to select Form Feed Time Out, and then press the Enter key. Form Feed Time-Out 30 sec. (0 495) 3 Press Y or Z to set the time, and then press the Enter key. You can set the time to 0 to 495 seconds in 5 second increments. OPERATION GUIDE 5-45