Kyocera TASKalfa 221 181/221 Operation Guide Rev-2 - Page 71
Adjusting Density, Lighter, Darker, Auto Density, Start, Description
View all Kyocera TASKalfa 221 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Adjusting Density Use this procedure to adjust the density when copying. Copying Functions Mode Description Auto Density mode The machine detects the density of the original and sets the optimum density. 4 Manual Density mode Adjust the density by pressing the Lighter or Darker key. NOTE: You can switch to the auto density mode if the overall copies come out too dark or too light. Refer to Auto Density Adjustment on page 6-7. If you select Photo as the image quality mode, you cannot select the Auto Density mode. The procedure for adjusting the density of copies is explained below. 1 Press the Copy key. 2 Place the originals on the platen. 3 Adjust density manually pressing Lighter to Darker key. To change density adjustment from Manual to Auto, press the Auto Density key. 4 Press the Start key to start copying. OPERATION GUIDE 4-3