Kyocera TASKalfa 2420w TASKalfa 2420w IPS Touch Screen Operation Guide - Page 165
Total Run, Custom Meter, Scan Count, Scan Count- Temp
View all Kyocera TASKalfa 2420w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
*145PVDI4DSFFO Total Run This meter counts the total number of linear meters run on the printer in all countries. One count = one linear meter NOTE The units of this counter are taken from the internal processor of the printer and can be "reset" if care is not taken upon replacement of the DC Controller. Please see 4820/9148/8148 Service Manual for details on the setting procedures. In case of discrepancies: The hard counter shall be taken as the correct value! Custom Meter This counter can be reset at any time to count the units in a particular job. The date of last "reset" is also displayed. This counter's units are the same as Meter A. Press the reset button to start at "0" Scan Count The Scan Count displays the total count of the "imaged" area. If the original was larger than the saved imaged area only the saved imaged area is recorded. If the incorrect original size was selected the selected size will be recorded. Example: With a 24x36 original a. If the original was feed 36" wide with a 36" wide setting on the User Interface then 6 sq ft recorded. j. If the 36" wide original was scanned in at a 24" wide manual setting, the size will be recorded as 24x24 or 2 square feet. Scan Count- Temp This counter can be reset at any time to count the units in a particular job if so required. The date of last "reset" is also displayed. This counter's units are the same as in Scan Count. Press the reset button to start at "0" This information is solely for use of Personnel and Authorized Dealers. No part of this publication may be copied, reproduced or distributed in any form without express written permission from. 2011. - 164 -