Kyocera TASKalfa 300i x Kyocera Command Center Operation Guide Rev 6.5.2012.7 - Page 13
Basic > Defaults > Time, Current Universal Time UTC/GMT
View all Kyocera TASKalfa 300i x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
COMMAND CENTER Pages • RA (Stateless) Select On to use RA to configure IPv6 addresses. • Default Gateway Specifies the IPv6 address of the default gateway. • DHCPv6 Specifies whether or not to obtain IPv6 IP addresses by automatic configuration. When RA is turned On, the IP addresses and server information are obtained via DHCPv6 based on the settings of the automatic configuration made under RA (router setting). Basic > Defaults > Time If a time server is used to synchronize the time as well, the current time can be adjusted regularly and easily. Enter the IP address of the time server and click the Synchronize button. Time information is required when you receive reports from this machine via E-mail. It is recommended that you set the time when the report mail function is enabled. Current Local Time Displays the time that is currently set in the machine. Current Universal Time (UTC/GMT) Displays the Greenwich Mean Time that is currently set in the machine. Time Zone Sets a time difference. Click the drop down list and select your region. Summer Time Switches the Summer Time setting On and Off. Select On in order to have the Summer Time function applied when the time is synchronized with a time server. Time Server Enter the host name or IP address of the time server from which you want to acquire the time. Synchronize with Time Server now Click the Synchronize button to synchronize the registered time with the designated timer server. Synchronization Status Displays the results of the synchronization operation with the time server. Basic > Defaults > Reset This page allows you to restart the machine in order to make all settings in the machine valid. It is also possible to select to have all settings returned to their factory default values. Restart entire device Clicking Restart restarts this machine. Restart Network Clicking Restart allows restarting the network interface without restarting the machine. The network interface must be restarted whenever a change has been made to the network settings. Reset entire device to factory default When clicking the Reset button, the machine returns to the factory default settings. However, the document box, address book, user information, logs, and certificates are not deleted. COMMAND CENTER 3-6