Kyocera TASKalfa 3051ci PRESCRIBE Commands Command Reference Manual Rev 5.1 - Page 266
RWRF R, Read/Write Resource File] Read
View all Kyocera TASKalfa 3051ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 266 highlights
PRESCRIBE Command Reference RWRF R - [Read/Write Resource File] Read Format RWER R, medium, "PRN", 'partition-name'; Parameters medium: 0 = hard disk A = memory card partition-name: Name of partition from which data is read, a maximum of 15 printable ASCII characters Function The RWRF R command reads data specified by file name from any external media. The data must be a printable data. When the file name is coexistent in both the hard disk and memory card that are installed in the printing system, the printing system will read the memory card first, then the hard disk. The partition name may be a maximum of 15 printable ASCII characters (20H through 7EH); upper and lowercase letters are regarded as distinct. A partition name may not have leading spaces, and in the command, the partition name must be enclosed in single or double quotation marks. The printing system will automatically' read or execute the data in the media if it is stored under the file name of '02autostart' and saved in the PRE folder of the media. The printing system will look for the file when it is powered up. The RWER R command is not required. This command causes a page break. Example: To read partition DataS001 from the hard disk: !R! RWRF R, 0, "PRN", 'DataS001'; EXIT; 256