Kyocera TASKalfa 3500i Kyocera Command Center RX User Guide Rev-1.2 - Page 24
Start > Status s, Network > IP Filters - scanner
View all Kyocera TASKalfa 3500i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Settings Pages This indicates the device's model, serial number, asset number, firmware information, etc. Device Settings This shows whether the administrator password is defined, the language the embedded server is displayed in, and the status of Auto Sleep, A4-Letter override, and Auto Error. Device Options This provides you with the information on installation of optional hardware equipment, such as a document processor. Printer Settings System information on the printing system is displayed, allowing you to verify the resolution, number of copies, gloss mode, EcoPrint mode, etc. Time This shows the time of day set in the printing system. Media Input This shows the size and media type for the paper loaded in the MP tray and the cassettes. Document Output This shows stack mode of each paper output devices. Face down delivers printed pages in forward order, whereas, Face up delivers printed pages in reverse order. Memory This shows the total memory installed in the printing system in megabytes. Advanced Options This provides you with the information on advanced features currently installed in the printing system. This includes Security Kit, Fax Kit, Card Reader, etc. Start > Status Pages These pages allow you to verify the various settings (device, printing, scanning, network and E-mail) that were made on the operation panel or using the embedded server. It is divided by the following items. • Network • Security • Device/Printer • Scanner • FAX/i-FAX • Counters Network > General This allows you to verify the current settings for LDAP, TCP/ IP, IPP, IPP over SSL, AppleTalk, NetBEUI, IPv4, and IPv6. For more information, refer to Advanced Page on page 6-29. Network > IP Filters 6-2 User Guide