Kyocera TASKalfa 4550ci Fax System (V) Operation Guide - Page 30
Preparation Before Use, Address Number, Character Entry Method on of the Appendix, Sub Address
View all Kyocera TASKalfa 4550ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Preparation Before Use Address: Name E-mail SMB FTP FAX Address Number Name : 0033 : Mike Status Cancel Back i-FAX Change Change Register 10/10/2010 10:10 3 Press [Change] of Address Number. 4 Using [+]/[-] or the numeric keys, enter the custom address number (0001 to 2,500). NOTE: The address number is the identification number for each destination. You can select a number available from a total of 2,500 numbers for registration 2,000 numbers for contact registration and 500 numbers for group registration. When '0000' is displayed, an available number is automatically assigned. 5 Press [OK]. 6 Press [Change] of Name. 7 Enter the destination name to be displayed on the Address Book, and press [OK]. Up to 32 characters can be entered. Address: Name E-mail SMB FTP FAX i-FAX NOTE: For details on character entry, refer to Character Entry Method on page 2 of the Appendix. 8 Press [FAX]. 9 Use the numeric keys to enter the number of the receiving system. Pause Space Sub Address : Encryption Key No. : Off TX Start Speed : 33600bps ECM : On Change Status Cancel Backspace Change Change Change Back Register 10/10/2010 NOTE: Up to 32 digits can be entered as the number of the receiving system. Press [Space] to enter a space. Use [ ] or [ ] to move the cursor. To correct the fax number, press [Backspace] on the touch panel, and delete the digits one by one before reentering the fax number. To delete the number entirely, press the Clear key on the operation panel. [Pause] Pressing this key adds about three seconds of waiting time during dialing. For example, when dialing the receiving system on an external line, you can use this method to insert a pause before resuming dialing after you dial a specific number. 10 Press [Change] of Sub Address. When you do not use sub address communication, go to step 14. 2-6