Kyocera TASKalfa 620 620/820 Operation Guide (Basic) - Page 61
Adjusting Density
View all Kyocera TASKalfa 620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Basic Operation Adjusting Density Adjust the density automatically or manually. [Manual] is selected as the default setting mode. When selecting [Manual], follow the steps as below. 1 Place the originals in the document processor or on the platen. 2 Press the density adjustment key ( / ) to adjust the density level. To use the automatic density mode, press [Auto density]. The copier determines a suitable density level for copying. To change the density mode from [Auto] to [Manual], press the density adjustment key ( / ). Ready to copy. 11x 8½" P l ai n 11x 8½" Re cycl e d 11x 17" P l ai n 8 ½ x1 1" P l ai n APS MP tray P l ai n 1 1 x8 ½" P l ai n Basi c User choice Auto % 100% Zoom Fu n cti o n Auto D e n si ty D e n si ty Program Paper Size 1 1 0 0% Off S tap l e Left Top S tap l e /Punch 3 Press the Start key to start copying. NOTE: By pressing [Density], the Density Mode screen will be displayed. You can also adjust the density from this screen. You can increase or decrease the density of the auto density mode. Refer to Chapter 3 of the Advanced Operation Guide. You can fix the default setting mode in the auto density mode. Refer to Chapter 3 of the Advanced Operation Guide. You can choose the adjustment level from 7 or 13. Refer to Chapter 3 of the Advanced Operation Guide. 3-5