Kyocera TASKalfa 7550ci 6550ci/7550ci Operation Guide Rev-1.2011.5 - Page 84
Preparation before Use, Specifying Paper Size and Media Type for the Cassettes on,
View all Kyocera TASKalfa 7550ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Preparation before Use The standard cassette 3 and 4 The standard cassette 3 and 4 will each hold plain paper, recycled paper or color paper. The standard cassette 3 and 4 hold up to 3,000 sheets (1,500-sheet x 2) of plain paper (80 g/m2) (or up to 3,500 sheets (1,750-sheet x 2) of 64 g/m2 plain paper). The following paper sizes are supported: A4, B5, Letter. IMPORTANT: • When using media types other than plain paper (such as recycled or colored paper), always specify the media type and paper weight settings. (Refer to Specifying Paper Size and Media Type for the Cassettes on page 2-42,Media Type Setting on page 9-8.) The cassettes can hold paper with weights up to 256 g/m2. If you are using a paper weight between 106 and 256 g/m2, set the media type to Thick and set the weight of the paper you are using. • Do not load thick paper that is heavier than 256 g/m2 in the cassettes. Use the multi purpose tray for paper that is heavier than 256 g/m2. 1 Pull the cassette out toward you until it stops. Clamp 2 Rotate the Paper Size Guide (A) clamp and remove. Pull the Paper Size Guide (A) up and out. Paper Size Guide (A) 3 Insert the Paper Size Guide (A) into the slot (bottom of cassette) for the paper size to be used. Make sure that the top of the paper size guide (A) matches the paper size to be used, attach the clamp, and rotate the clamp to lock it. Gently try moving the Paper Size Guide (A) to verify that it is fixed. 2-34