Kyocera TASKalfa 8001i Kyocera Command Center RX User Guide Rev-2013.02 - Page 43
FAX/i-FAX, Certificate Status, Common Settings
View all Kyocera TASKalfa 8001i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Function Settings Specifies a name or IP address for the LDAP server. This is required only if Active Directory which contains Scan Process is unidentical with the server for the network authentication. LDAP Port Number Sets the port number used by LDAP The default port is 389. Search Timeout Specifies the timeout time after which a search on the LDAP server expires. LDAP Security (DSM Scan) Display whether a LDAP security is available or not. Select the LDAP security from LDAP Security (DSM Scan) drop-down list on the Protocol Settings page. Authentication Type Selects either the Simple or SASL for the authentication type. 3. Click Submit button. Certificate Status 1. Click DSM Scan under Function Settings on the navigation menu. The DSM Scan Settings page opens. 2. The status of the Root Certificates 1 (to 5) and DSM Client Certificate is shown. Make settings for the Root Certificate in Certificates page. FAX/i-FAX This section includes advanced settings for FAX/i-FAX. If the settings for the item marked with an asterisk (*) has been changed, you must restart the machine or the network. To restart the machine, proceed to the Reset page. Common Settings 1. Click FAX/i-FAX under Function Settings on the navigation menu. The FAX/i-FAX Settings page opens. 2. You can configure settings for Transmission. Make the following settings: 1. Local FAX Name: Specifies your FAX system name. 2. TTI: Selects On or Off whether to send the TTI (Transmit Terminal Identifier) information to the other party. 3. TTI Position: Selects the position of the TTI to be printed on the transmitted documents. 4. Account as Local FAX Name: Set to On to use the account name as the local FAX name. The account name appears in place of the local FAX name. 5. Retry Times: Specify the Retry Times from 0 to 14 times. 3. You can configure settings for Reception. Make the following settings: 1. Media Type: Sets the media type to print the received documents. 2. Use MP Tray: Selects whether or not to include the MP (multi-purpose) tray for auto media selection when printing received documents. When turned On, the MP User Guide 39