LG 14T90Q-K.AAG9U1 Owners Manual - Page 5
Connecting LAN Adapter, Power Connection, CAUTION
View all LG 14T90Q-K.AAG9U1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Connecting LAN Adapter 4 ENGLISH ! CAUTION • When packing or moving the product, close the LCD panel to protect it. • Be careful not to pinch your fingers between the PC main body and the LCD panel. • Do not rotate the LCD panel with excessive force. This may damage the hinge connecting the PC body and the LCD panel. • In tablet PC mode, the keyboard faces the bottom of the product. Clean around the product to prevent the keyboard and PC body from being damaged. NOTE • When rotating the product, the screen is rotated vertically or horizontally according to the current screen angle. • To leave standby mode (LCD off), press the power button or sleep button. • For details on tablet PC mode, refer to the LG Easy Guide of the LG PC Manuals. Connecting LAN Adapter To connect to the wired LAN, you must purchase a LAN adapter separately. 1 Connect the LAN adapter to the USB-C™ port on the PC. • The USB-C™ port can be used without having to differentiate between the top and bottom surfaces. 2 Connect the network cable (LAN) to the LAN adapter. 3 Check if you can connect to the Internet properly. Power Connection The AC adapter is used to power and charge the PC. • Do not use any other AC adapter than the one that was provided when you purchased this product. 1 Connect an end of the cable to the AC adapter and the other end to a power outlet. • The AC adapter can be used from 100 V to 240 V. 2 Connect the AC adapter jack to the PC USB-C™ port. • Ensure that the power jack linked to the AC adapter and product is connected firmly. When the AC adapter is connected, the AC adapter lamp turns on. Status White Orange Off Power Lamp When the AC adapter is connected and charging is complete. When the AC adapter is connected and is charging. The AC adapter is not connected. • If you try to turn on the system that has entered the Hibernates mode or been turned off after a low-battery alarm, the system will not be turned on but the lamp will blink three times. If this is the case, connect the AC adapter and charge the battery sufficiently before using it.