LG 15LC1RB Owners Manual - Page 13

External Equipment Connections Installation Antenna Connection - For optimum picture quality, adjust antenna direction. Connecting to an Inside Antenna Setup - Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.) Turn clockwise to tighten. 75Ω Round Cable Copper Wire NPUT ANT IN ( 75 ) Apartment Buildings 300Ω Flat Wire Wall Connection Jack Antenna Converter Antenna Jack - If you have a 75Ω round cable, insert the bronze wire and then tighten the connection nut. If you have a 300Ω flat wire, connect the twisted wire to the antenna converter and then connect the converter to the antenna jack on the TV. - If using 75Ω round cable, do not bend the bronze wire. It may cause poor picture quality. Connecting to an Outdoor Antenna Setup - This type of antenna is commonly used in single family dwellings. VHF Antenna Turn clockwise to tighten. UHF Antenna 75Ω Round Cable Copper Wire Single Family Home 300Ω Flat Wire Antenna Converter NPUT ANT IN ( 75 ) Antenna Jack - In poor signal areas, to get better picture qual- ity, install a signal amplifier to the antenna as shown to the right. - If signal needs to be split for two TVs, use an VHF antenna signal splitter for connection. UHF PC INPUT ANT IN ( 75 ) Signal Amplifier 13