LG 16MR70.ASDU1 Owners Manual - Page 8

7 Pre-Tech Support Checklist ENGLISH Pre-Tech Support Checklist If the following symptoms appear while using the product, check again. It may not be a malfunction. Symptom Cause and Solution The screen stays y Check if the device connected to the monitor blank or connection supports DisplayPort Alternate Mode (DP Alt Mode) is unstable. and USB Power Delivery (USB PD). y If the smartphone is not connected, connect the USB-C™ cable to the monitor first and then connect the smartphone. The power does not turn on. y Check if you can properly connect the device to the monitor using the USB-C™ cable that comes with the monitor. The monitor's y This phenomenon occurs when the signal sent from supported the PC exceeds the horizontal or vertical frequency frequency range range. Refer to the Factory Mode settings and reset has been exceeded. the frequency. The screen looks unclear. y Setting the screen resolution to any other than the recommended (optimal) resolution may result in blurry text or dimming, cropping, or tilting of the screen. Use the recommended screen resolution setting. Screen burn-in y Note that having a fixed screen on for an extended remains even when period of time may cause damage to the display and power is off. lead to screen burn-in. y To use the monitor for a long time, use a screensaver. Symptom There are spots on the screen. I can't charge. Cause and Solution y You may see a few pixel spots (red, green, blue, white, black) on the screen while using the monitor. This is a normal phenomenon of an LCD screen. This is unrelated to the monitor performance and is not an abnormality. y Check if the adapter supports PD charging. It is recommended to use a PD charger with 45 W or higher. Appendix Product Specifications Display Color Depth Resolution Display Standard Supported Power 16 inch (40.6 cm) IPS LCD 16.7 million colors (8 bits) Maximum Resolution 2560 x 1600 @ 60 Hz Recommended Resolution 2560 x 1600 @ 60 Hz DisplayPort Alternate Mode (DP Alt Mode) Rated Power Consumption 5 - 20 V 0 3.25 A Operation mode: 8 W general (factory default)*