LG 22M38D-B Owners Manual - Page 12

ENEGNLGISH 12 ASSEMBLING AND PREPARING Mounting on a wall For proper ventilation, allow a clearance of 100 mm(3.94 inches) on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 100 mm (3.94 inches) 100 mm (3.94 inches) 100 mm (3.94 inches) 100 mm (3.94 inches) If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 If you use screw longer than standard, the moni- tor might be damaged internally. 2 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. Model 19M38A 20M38A 22M38A 19M38D 20M38D 22M38D 19M38H 20M38H 22M38H Wall Mount (A x B) Standard screw Number of screws 75 x 75 M4 4 Model Wall Mount (A x B) Standard screw Number of screws 24M38A 27MP38VQ 24M38H 24M38D 27MP38HQ 100 x 100 M4 4 yyWall Mount (A x B) AB CAUTION yyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur. yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. yyUse only an authorized LG wall mount and contact the local dealer or qualified personnel. yyDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty. yyUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. yyScrew length from outer surface of back cover should be under 8mm(0.31 inches). Wall mount Pad Back Cover Wall mount Pad Back Cover Standard screw Max.8mm(0.31 inches) NOTE yyUse the screws that are listed on the VESA standard screw specifications. yyThe wall mount kit will include an installation manual and necessary parts. yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer. yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length. yyFor more information, refer to the instructions supplied with the wall mount.