LG 23LC1RB Owners Manual - Page 32

Troubleshooting

Page 32 highlights

Troubleshooting Checklist Troubleshooting Checklist The re.re co_ doesn,t work - Check to see if there is any object between the product and the remote control causing obstruction. -Are _tteries installed with correct polarity (+ to +, o to =)? - Correct remote operating mode set: TV, VCR etc.? - Install new batteries. Power is suddenly turned off ° Is the sleep timer set? ° Che_ck the power control settings Power interrupted ° No broadcast on station tuned with Auto off activated ,J NO sound slowly after switching on • Check whether the product is turnod on. • Try another channel. The problem may be with the broadcast. • Is the power cord inserted into wall power out_et? • Check your antenna direction and/or location. • Test the wall power outlet, plug another product's power cord into the outlet where the product's power cord was plugged in. • This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes° No or poor color or poor picture ° Adjust Color in menu option ° Keep a sufficient distance between the product and the VCR, ° Try another channel, The problem may be with the broadcast. ° Are the video cables ins_lled properly? ° A_ivate any function to restore the brightness of the picture, Horizontal/vertical ° Check for local interference such as an e_ectrical appliance or power tool. Poor reception on _ chanr_ls • Station or cable product experiencing problems, tune to another station • Station signal is weak, reorient antenna to receive weaker station, • Check for sources of possible interference_ Lines or streaks in pictures ° Check antenna (Change the direction of the antenna) ,J 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Troubleshooting
Checklist
Troubleshooting
Checklist
The re.re
co_
doesn,twork
Power
is
suddenly
turned
off
-
Check
to see if there is any
object
between
the
product
and the
remote
control
causing
obstruction.
-Are
_tteries
installed
with correct
polarity
(+ to +,
o
to
=)?
- Correct
remote
operating
mode
set: TV, VCR
etc.?
- Install
new batteries.
° Is the sleep
timer
set?
° Che_ck the
power
control
settings
Power
interrupted
°
No broadcast
on station
tuned
with Auto off activated
,J
• Check
whether
the product
is turnod
on.
• Try another
channel.
The problem
may be with the broadcast.
• Is the power
cord
inserted
into wall power
out_et?
NO
sound
• Check
your antenna
direction
and/or
location.
• Test the wall
power
outlet,
plug another
product's
power
cord
into the
outlet
where
the product's
power
cord was
plugged
in.
• This
is normal,
the image
is muted
during
the product
startup
slowly
after
process.
Please
contact
your service
center,
if the picture
has not
switching
on
appeared
after
five minutes°
°
Adjust
Color
in menu
option
No or
poor
°
Keep
a sufficient
distance
between
the product
and the VCR,
color
° Try another
channel,
The problem
may
be with
the broadcast.
or poor
picture
°
Are the video
cables
ins_lled
properly?
°
A_ivate
any function
to restore
the brightness
of the picture,
Horizontal/vertical
° Check
for local interference
such
as an
e_ectrical
appliance
or power
tool.
Station
or cable
product
experiencing
problems,
tune to another
station
Poor
reception
on
Station
signal
is weak,
reorient
antenna
to receive
weaker
station,
_
chanr_ls
• Check
for sources
of possible
interference_
Lines
or
streaks
° Check
antenna
(Change
the direction
of the antenna)
in pictures
,J
32