LG 23LS7DC Owners Manual - Page 75

10. Tint (Command2:j) To adjust the screen tint. You can also adjust tint in the Video menu. Transmission [k][J][ ][Set ID][ ][Data][Cr] Data Red : 0 - Green : 64 *Refer to 'Real data mapping'. [01_p,.73, Acknowledgement [ j ] [ ][Set ID] [ ]JOKING] [Data] [x] 11. Sharpness (Command2:k) To adjust the screen sharpness. You can also adjust sharpness in the Video menu, Transmission [k] [k][ ] [Set ID][ ] [Data] [Cr] Data Mira 0 - Max: 64 _Refer to 'Real data mapping: IIIlUp_.73. Acknowledgement [k] [] [Set ID] [ ][OKiNG] [Data] [x] 12. OSD Select (Command2:l) To select OSD (On Screen Display) on/off, Transmission [k][[][ ][Set lD][ ][Data][Cr] Data 0: OSD off Data 1 : OSD on Acknowledgement [I] [ ] [Set ID] [ ] [OK!NG] [Data] [x] 13. Remote Control Lock Mode (Command2:m) To lock the remote control and the front panel controls on the set, Transmission [k] [m] [ ] [Set [D] [ ] [Data] [Cr] Data 0: Lock off Data 1 : Lock on Acknowledgement [m][ ] [Set ID][ ] [OK/NG] [Data] [x] If you're not using the remote control and front panel m Z controls on the TV, use this mode. When main power is on/off, remote control lock is released. X 14. Treble (Command2:r) To adjust treble. You can also adjust treble in the Audio menu. Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Mira 0 - Max: 64(_transmit by Hexadecimal code) _Refer to 'Real data mapping: _ p.73. Acknowledgement [r] [] [Set ID] [] [OK/NG] [Data] [x] 15. Bass (Command2:s) To adjust bass. You can also adjust bass in the Audio menu. Transmission [k] [s] [ ][Set ID] [ ][Data] [Cr] Data Mira 0 - Max: 64(*transmit by Hexadecimal code) _Refer to 'Real data mapping'. _ p.73. Acknowledgement [s] [ ] [Set ID] [ ] [OKiNG] [Data] [x] 74 1 6. Balance (Command2:t) To adjust balance. You can also adjust balance in the Audio menu. Transmission [El [t] [ ] [Set ID] [][Data] [Cr] Data Min: 0 - Max: 64(_transmit by Hexadecimal code) _Refer to 'Real data mapping'. _ p.73. Acknowledgement [t] [ ] [Set ID] [ ] [OK/NG] [Data] [x] 17. Color Temperature (Command2:u) To adjust color temperature. You can also adjust color temperature in the Video menu. Transmission [k] [u] [ ] [set ID] [ ] [Data] [Cr] Data O: Medium 1: Cool 2: Warm 3: User Acknowledgement [u][ ] [Set ID][ ] [OKiNG] [Data] [x] 1 8. Channel Tuning (Command: m a) To tune channel to following physical/major/minor number. Transmission [m] [a] [ ] [Set ID] [ ] [Data0] [ ][Data1 ] [ ] [Data2] [ ] [Data3] [ ] [Data4] [ ] [DataS] [Cr] Digital channels have a Physical, Major. and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel to the Major number, the Physical number is not required when sending a command. Data 0: Physical Channel Number NTSC air: 02-45, NTSC cable: 01,0E-7D ATSC air: 01-45, ATSC cable: 01-87 Data1 & 2: Major ChanneI Number Data1 : High byte Data2: Low byte Two bytes are available for the Major and Minor, normally only the second byte is used. Data3 & 4: Minor Channel Number Not needed for NTSC.