LG 27MK430H-B Owners Manual - Page 13

Mounting on a wall

Page 13 highlights

13 ENEGNLGISH Mounting on a wall For proper ventilation, allow a clearance of 100 mm (3.94 inches) on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 100 mm (3.94 inches) 100 mm (3.94 inches) 100 mm (3.94 inches) 100 mm (3.94 inches) If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 If you use screw longer than standard, the monitor might be damaged internally. 2 If you use improper screw, the product might be dam- aged and drop from mounted position. In this case, LG Electronics is not responsible for it. Model Wall Mount (A x B) Standard screw Number of screws 20MK4 series 22MK4 series 24MK4 series 75 x 75 M4 4 Model Wall Mount (A x B) Standard screw Number of screws 27MK4 series 27MN430H 100 x 100 M4 4 y yWall Mount (A x B) AB CAUTION y yDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur. y yIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. y yUse only an authorized LG wall mount and contact the local dealer or qualified personnel. y yDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty. y yUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. y yScrew length from outer surface of back cover should be under 8mm. Wall mount Pad Back Cover Wall mount Pad Back Cover Standard screw Max.8mm NOTE y yUse the screws that are listed on the VESA standard screw specifications. y yThe wall mount kit will include an installation manual and necessary parts. y yThe wall mount bracket is optional. You can obtain additional accessories from your local dealer. y yThe length of screws may differ depending on the wall mount. Be sure to use the proper length. y yFor more information, refer to the instructions supplied with the wall mount.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

13
ENG
ENGLISH
Mounting on a wall
For proper ventilation, allow a clearance of 100 mm
(3.94 inches) on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
If you intend to mount the Monitor set to a wall, attach
Wall mounting interface (optional parts) to the back of
the set.
When you install the Monitor set using a wall mounting
interface (optional parts), attach it carefully so it will not
drop.
1
If you use screw longer than standard, the monitor
might be damaged internally.
2
If you use improper screw, the product might be dam-
aged and drop from mounted position.
In this case, LG Electronics is not responsible for it.
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
y
Disconnect the power cord first, and then move
or install the Monitor set. Otherwise electric
shock may occur.
y
If you install the Monitor set on a ceiling or
slanted wall, it may fall and result in severe
injury.
y
Use only an authorized LG wall mount and
contact the local dealer or qualified personnel.
y
Do not over tighten the screws as this may
cause damage to the Monitor set and void your
warranty.
y
Use only screws and wall mounts that meet
the VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
y
Screw length from outer surface of back cover
should be under 8mm.
y
Use the screws that are listed on the VESA
standard screw specifications.
y
The wall mount kit will include an installation
manual and necessary parts.
y
The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
y
The length of screws may differ depending on
the wall mount. Be sure to use the proper length.
y
For more information, refer to the instructions
supplied with the wall mount.
CAUTION
NOTE
Back Cover
Wall mount Pad
Wall mount Pad
Back Cover
Standard screw
Max.8mm
y
Wall Mount (A x B)
A
B
Model
27MK4 series
27MN430H
Wall Mount (A x B)
100
x 100
Standard screw
M4
Number of screws
4
Model
20MK4 series
22MK4 series
24MK4 series
Wall Mount (A x B)
75
x 75
Standard screw
M4
Number of screws
4