LG 32LG500H User Manual - Page 17

Protection Cover, Stand Installation

Page 17 highlights

PREPARATION 32/37/42LG500H BACK COVER FOR WIRE ARRANGEMENT 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PLUG IN TYPE HOLDER for power code and PROTECTIVE BRACKET/Screw. It will help prevent the power cable from being removed by accident. STAND INSTALLATION 1 Carefully place the TV screen side down on a cush- ioned surface to protect the screen from damage. 2 Assemble the parts of the STAND BODY with COVER BASE of the TV. PLUG IN TYPE HOLDER PROTECTIVE BRACKET (This feature is not available for all models.) 2 Install the CABLE MANAGEMENT CLIP as shown. If your TV has the CABLE HOLDER, install it as shown and bundle the cables. STAND BODY COVER BASE 3 Assemble the TV as shown. CABLE MANAGEMENT CLIP CABLE HOLDER 3 Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed. PROTECTION COVER After removing the stand, install the included protection cover over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click. 4 x 4 Tighten the stand with the four screws (provided as parts of the TV). or x 2 x 2 Tighten the two of these four screws and the two Torx plus star head screws (provided as parts of the TV) to secure the TV. Tighten the two Torx plus star head screws with a star head dri- ver bit (not provided as parts of the TV). ! NOTE G When assembling the desk type stand, make sure the bolt is fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90

PREPARATION
15
1
2
3
32/37/42LG500H
After removing the stand, install the included
protection
cover
over the hole for the stand.
Press the
PROTECTION COVER
into the TV until you
hear it click.
PROTECTION COVER
STAND INSTALLATION
BACK COVER FOR WIRE
ARRANGEMENT
Assemble the parts of the
STAND BODY
with
COVER BASE
of the TV.
2
Assemble the TV as shown.
3
4
STAND BODY
COVER BASE
Carefully place the TV screen side down on a cush-
ioned surface to protect the screen from damage.
1
G
When assembling the desk type stand, make sure
the bolt is fully tightened (If not tightened fully,
the TV can tilt forward after the product installa-
tion). Do not
over tighten.
NOTE
!
or
x 4
Tighten the stand with the
four screws (provided as
parts of the TV).
Tighten the two of these four screws
and the two Torx plus star head screws
(provided as parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a star head dri-
ver bit (not provided as parts of the TV).
x 2
x 2
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP
section.
Secure the power cable with the
PLUG IN TYPE
HOLDER
for power code and
PROTECTIVE
BRACKET
/
Screw
. It will help prevent the power
cable from being removed by accident.
PROTECTIVE BRACKET
(This feature is not available for
all models.)
PLUG IN TYPE HOLDER
Install the
CABLE MANAGEMENT CLIP
as shown.
If your TV has the CABLE HOLDER, install it as
shown and bundle the cables.
CABLE MANAGEMENT CLIP
CABLE HOLDER
Put the cables inside the
CABLE MANAGEMENT
CLIP
and snap it closed.