LG 32LX2R Service Manual - Page 12

4. ADC Calibration 5. white Balance 4.1 Adjustment of RF/AV/SAV * Test Equipment - Remote controller for adjustment - MSPG-925F Pattern Generator->Model: 202 / Pattern: 32 4.1.1 Method of Auto RF/AV/S-VIDEO Color Balance. 1) Input the Video Signal: 75% Color Bar signal into AV3 (ZE), AV1(TE), VIDEO1(ME) 2) Set the PSM to Standard mode in the Picture menu. 3) Press ADJ key on R/C for adjustment. 4) Press the (Vol. +) key to operate the set, then it becomes automatically. 5) Auto-RGB OK means the adjustment is completed. 4.2 Adjustment of Component. * Required Equipments - Remote controller for adjustment - MSPG-925F Pattern Generator->Model: 215 / Pattern: 33 4.2.1 Method of Auto Component Color Balance 1) Input the Component 720p 100% Color Bar(MSPG- 925F model:215, pattern:33) signal into Component. (ZE : component , TE/ME : component 1 or 2) 2) Set the PSM to Standard mode in the Picture menu. 3) Press the ADJ key on R/C for adjustment. 4) Press the (Vol. +) key to operate the set , then it becomes automatically. 5) Auto-RGB OK means the adjustment is completed. 4.3 Adjustment of RGB * Required Equipments - Remote controller for adjustment - MSPG-925F Pattern Generator 4.3.1 Method of Auto RGB Color Balance 1) Input the PC 1024x768@60Hz 1/2 Black & White Pattern(MSPG-925F model:37, pattern:18) into RGB. (using D-sub to DVI-I cable) 2) Set the PSM to Standard mode in Picture menu. 3) Press the ADJ key on R/C for adjustment. 4) Press the (Vol. +) key operate To set , then it becomes automatically. 5) Auto-RGB OK means adjustment is completed. 5.1 Manual white Balance (AV) 1) Execute CA-110 Zero Calibration. 2) Execute the SET Heat Run for 30minutes 3) Push the ADJ Button then you can see the OSD 4) Push the ADJ Button again for White Balance mode 5) Adjust High light with R/B Gain/Offset(G Gain fix, G Offset fix) - 12 -