LG 37LB1DA Owners Manual - Page 118
Programmlngthe Remotecontrol - model
UPC - 719192169784
View all LG 37LB1DA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
512F-2 06/'6/29 8:30 A_ Page 117 PROGRAMMLNGTHE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable Note that the remote may not control a!l models of other brands. devices. Programming a code into a remote mode O To find out whether your remote control can operate each device without programmin& (such as a VCR) and press the corresponding mode button on the remote. turn on the device After that, press the POWER button. If the device is turned off and it responds need not be programmed. If no_ the remote should be programmed to operate ming procedures are explained below. properly the remote control the device. The program- 0 Press the MENU and MUTE button continuously at the same time for two seconds; the currently selected device button is illuminated. If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case, you have to repeat from step 2. 0 Enter the appropriate code from the code _ble on the following pages. When pressing the button, the light blinks at a time. if the device turned off. the programming is successful. O Press the MENU button to store the code. After blinking twice, this code is stored. 0 Test the remote control functions to see if the device responds properly. If not, steps 2_5. m Z i x 117