LG 37LC2D Owners Manual - Page 19
Installation - fix
UPC - 719192169791
View all LG 37LC2D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installation - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. - Typically a frozen still picture from a VCR. if the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. "e VCR @ Connect the RF antenna out socket of the VCR to the Antenna s0cket on the set _" @ .£_,[_ /R/AUDioILl WDEO ,.e ® ® @ Connect the antenna cable t0the RF antenn a in socket of the VCR O Set VCR output switch to 3 or 4 and then tune TV @ Insert a video tape into the VCR and press PLAY on the VCR. (Refer t0 the vcR owner's manual,) VCR AUD tit 0 OUTPUT Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow. Audio Left = white and Audio Right = red/ Insert a video tape into the VCR and press PLAY on the VCR CRefer to the VCR owner's manual.I Select AV1 input source using the INPUT button on the remote control. - f connected to AV IN2. select AV2 input source. • If you have a mono VCR. connect me audio cable from the VCR to the AUDIO L/MONO jack of the set 19