LG 37LF65 Owner's Manual - Page 109

01. Power (Command 2 : a) G To control Power On/Off of the set. Transmission 04. Screen Mute (Command 2 : d) G To select screen mute on/off. Transmission [k][a][ ][Set ID][ ][Data][Cr] [k][d][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Ack [a][ ][Set ID][ ][OK][Data][x] G To show Power On/Off. Transmission 1 : Power On Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off) Ack [d][ ][Set ID][ ][OK][Data][x] 05. Volume Mute (Command 2 : e) [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] G To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission * In like manner, if other functions transmit '0xFF' data based on this format, Acknowledgement data feed back presents status about each function. 02. Input Select (Command 2 : b) [k][e][ ][Set ID][ ][Data][Cr] Data 0 : Volume mute on (Volume off) 1 : Volume mute off (Volume on) Ack G To select input source for the set. You can also select an input source using the INPUT button on the set's remote control. Transmission [k][b][ ][Set ID][ ][Data][Cr] Data 0 : DTV (This feature is not available for all models.) 1 : Analogue 2 : AV1 3 : AV2 4 : AV3 5 : Component Ack 6 : RGB-PC 7 : HDMI1 8 : HDMI2 9 : HDMI3(Only 37/42LF7*, 42LY99) [e][ ][Set ID][ ][OK][Data][x] 06. Volume Control (Command 2 : f) G To adjust volume. You can also adjust volume with the VOLUME buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 * Refer to 'Real data mapping 1'. See page 109. Ack [f][ ][Set ID][ ][OK][Data][x] [b][ ][Set ID][ ][OK][Data][x] 03. Aspect Ratio (Command 2 : c) (Main Picture Size) G To adjust the screen format. (Main picture format) You can also adjust the screen format using the RATIO (Aspect Ratio Control) button on remote control or in the SCREEN menu. Transmission [k][c][ ][Set ID][ ][Data][Cr] 07. Contrast (Command 2 : g) G To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 * Refer to 'Real data mapping 1'. See page 109. Ack Data 1 : Normal screen (4:3) 2 : Wide screen (16:9) 3 : Horizon (Spectacle) (Except 37/42LF7*, 42LY99) 4 : Zoom1 5 : Zoom2 6 : Original [g][ ][Set ID][ ][OK][Data][x] 7 : 14:9 8 : Full(Except 42LY99) 08. Brightness (Command 2 : h) 9 : 1:1 Pixel (or Just Scan (Only 37/42LF7*, 42LY99) G To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission Ack [k][h][ ][Set ID][ ][Data][Cr] [c][ ][Set ID][ ][OK][Data][x] * Using the PC input, you select either 16:9 or 4:3 Data Min : 0 ~ Max : 64 * Refer to 'Real data mapping 1'. See page 109. Ack screen aspect ratio. * In HDMI (1080i 50Hz/60Hz, 1080p 24Hz/50Hz/60Hz) mode, 1:1 Pixel(or Just Scan [h][ ][Set ID][ ][OK][Data][x] (Only 37/42LF7*, 42LY99)) is available. APPENDIX 107