LG 42LBX Owner's Manual (English) - Page 96
Transmission / Receiving, Protocol, Command1][Command2][ ][Set ID][ ][Data][Cr]
UPC - 719192171473
View all LG 42LBX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
APPENDIX Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set.(j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID '0', every connected the TV is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission/receiving protocol. [DATA] : To transmit command data. Transmit 'FF' data to read status of command. [Cr] : Carriage Return ASCII code '0x0D' [ ] : ASCII code 'space (0x20)' *In this model, TV will not send the status during the standby mode. OK Acknowledgement [Command2][ ][Set ID][ ][OK][Data][x] The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. *in this model, TV will not send the status during the standby mode. *data format [command 2] : use as command. [Set ID] : use the small character, if set ID is 10, it will send the '0','a' [Data] : use the small character, if data is 0xab, it will send the 'a', 'b' [OK] : use the large character *in this model, TV will send the echo, CR, LF with ack message. When it send the power on ack message, it will be like below. Ex) ka 01 01(CR)(LF)a 01 OK01x(CR)(LF) Error Acknowledgement [Command2][ ][Set ID][ ][NG][Data][x] The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors. Data1: Illegal Code Data2: Not supported function Data3: Wait more time *in this model, TV will not send the status during the standby mode. *data format [command 2] : use as command. [Set ID] : use the small character, if set ID is 10, it will send the '0','a' [Data] : use the small character, if data is 0xab, it will send the 'a', 'b' [NG] : use the large character *in this model, TV will send the echo, CR, LF with ack message. When it send the power on ack message, it will be like below. Ex) ka 01 01(CR)(LF)a 01 NG01x(CR)(LF) APPENDIX 94