LG 42LG30DC Owners Manual - Page 115
TransmissiOn, Acknowledgernen, Transmission, Acknowledgement[g]
![]() |
UPC - 719192174115
View all LG 42LG30DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Data 05: The table above lists the binary code which must be converted to Hexadecimal before sending. For example: 20. Channel Add/Del (Command: m b) To add and delete the channels The binary code to tune the sub source to an NTSC cable channel is "1000 0001 ", which translates to "81" in Hex. 7th bit : For which source do you want to change the channel. 6th bit: Use a two part or one part channel. Most cases just use 0 since it's ignored when using NTSC. 5th bit: Use 0 with NTSC since it can only use the physical channel number. Normally use 1 for ATSC since most times it doesn't matter what the physical number is. TransmissiOn [m] [b][] [Set ID] [ ] [Data] [Cr] Data 00: Channel Delete Data 01 : Channel Add Acknowledgernen_ [b][ ][Set ID][ ][0K/NG] [Data] [x] 21. Key (Command: m c) To send IR remote key code. Transmission [m] [c][] [Set ID] [] [Data] [cr] Data Key code: Refer to page 108. Acknowledgernen_ [c][ ][Set ID][ ][OK/NG] [Data] [x] 4th bit: Set to 0. 3-0 bits: Choose signal type. 22. Backlight (Command: m g) To adjust screen backlight. * Tune Command Examples: TransmissiOn[m] [g] [ ] [Set iD] [ ] [Data] [Cr] Data Min:O0 - Max:64 (*transmit by Hexadecimal code) 1. Tune to the analog (NTSC) cable channel 35. Data 00 = Physical of 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = 0000 0001 in binary = 01 Total = ma 00 23 00 00 00 00 01 *Refer to 'Real data mapping'. See page 113. Acknowledgement[g] [ ] [Set ID] [ ] [OKiNG] [Data] [x] Z X 2. Tune to the digital (ATSC) local channel 30-3. Data 00 = Don't know Physical = 00 Data 01 & 02 = Major is 30 = 00 1 E Data 03 & 04 = Minor is 3 = 00 05 Data 05 = 0010 0010 in binary = 22 Total = ma 00 00 00 1E 00 03 22 Ackno_ledg_men![a][] [Set !D][] [O K.] [DataO0] [DataO] ] [Data02] [DataOS] [Data04 ] [x] [a][] [Set !D NG] [DataO0] [x] 115
![](/manual_guide/products/lg-42lg30dc-owners-manual-03b03ee/115.png)