LG 42PC5D Owner's Manual (English) - Page 30

EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Overview When the RGB input of the set is connected to a PC output, select the RGB-PC as the main input mode. When HDMI/DVI connect to PC output and select HDMI/DVI input, this function is used. After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality. When you change the resolution, select the proper resolution in present input to see the best picture appearance. Adjustment for screen Resolution, Position, Size, and Phase 1 Press the ADJUST button and then use D or E button to select Resolution, Position, Size, or Phase. 2 Press the ENTER button and then use D E F G button to make appropriate adjustments. I The Phase adjustment range is -16 ~ +16. In HDMI/DVI-PC mode, Phase is not available. I The Size adjustment range is -30 ~ +30. In HDMI/DVI-PC mode, Size is not available. 3 Press the ENTER button. Initializing (Reset to original factory values) To initialize the adjusted values 1 Press the ADJUST button and then use D or E button to select Reset. 2 Press the ENTER button and then use F or G button to select Y e s. 3 Press the ENTER button. PICTURE SOUND SAP CC ADJUST Resolution Position Size Phase 1024 x 768 1280 x 768 1360 x 768 1366 x 768 Reset D MENU Close FG E Move Ok 123 Resolution This function allows you select resolution of XGA/WXGA. Position This function is to adjust picture to left/right and up/down as you prefer. Size This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters. Resolution Position Size Phase Reset Initialize Settings Yes No D MENU Close FG E Move Ok 123 28