LG 42PM3MV Owners Manual - Page 11
External Equipment Connections - tv
UPC - 719192169555
View all LG 42PM3MV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
External Equipment Connections External Equipment Connections NOTE: All cables shown are not included with the monitor. VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and monitor. - Use the ISM Method (on the Special menu) feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. Connection Option 1. Connect the audio and video cables from the VCR's output jacks to the set input jacks, as shown in the figure. When connecting the set to VCR, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). If you connect an S-VIDEO output from VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input. 2. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) 3. Select the input source with using the INPUT button on the remote control. AUDIO VARIABLE AUDIO OUT VIDEO R L AUDIO COMPONENT INPUT 2 COMPONENT INPUT 1 MONITOR OUT A/V INPUT R L MONO AUDIO VIDEO S-VIDEO Do not connect to both Video and SVideo at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work. ANT IN S-VIDEO ANT OUT OUT OUTPUT (R) AUDIO (L) SWITCH 3 4 IN VIDEO VCR Cable TV Setup - After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming. The set cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the set. - For further information regarding cable TV service, contact your local cable TV service provider(s). Connection Option 1. Connect the audio and video cables from the Cable Box's output jacks to the set input jacks, as shown in the figure. When connecting the set to a Cable Box, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). 2. Select the input source with using the INPUT button on the remote control. 3. Select your desired channel with the remote control for cable box. AUDIO VARIABLE AUDIO OUT VIDEO R L AUDIO COMPONENT INPUT 2 COMPONENT INPUT 1 MONITOR OUT A/V INPUT R L MONO AUDIO VIDEO S-VIDEO (R) AUDIO (L) VIDEO TV VCR OUTPUT SWITCH 34 RF Cable Cable Box Owner's Manual 11