LG 42SH7DB User Guide - Page 47

26. On timer input (Command: f u) Adds a new schedule entry by selecting input for the current on timer setting. Transmission [f][u][ ][Set ID][ ][Data1][Cr] [f][u][ ][Set ID][ ][Data1][Data2][Cr] Data (adding schedule) 20: AV 40: Component 60: RGB 70: DVI-D 90: HDMI (HDMI1) (DTV) 91: HDMI2/OPS (DTV) C0: DISPLAYPORT (DTV) Data1 1. f1h to f7h (reading data) F1: Select the 1st schedule input source F2: Select the 2nd schedule input source F3: Select the 3rd schedule input source F4: Select the 4th schedule input source F5: Select the 5th schedule input source F6: Select the 6th schedule input source F7: Select the 7th schedule input source 47 Data2 1. ffh (reading data) To read the schedule input, enter FFH for [Data2]. If no schedule is available for [Data1] when attempting to read or change the schedule data, the text NG will be displayed and the operation will fail. (Example 1: fu 01 60 - Move existing schedule entries down one row each and save RGB as input source for the 1st schedule entry.) (Example 2: fu 01 f1 ff - Read the 1st schedule input data.) * This function is only supported when 1 (year/month/ date), 2 (hour/minute/second) and On Time (repeat mode/time) are set. * Input may not be supported on some models. Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] [u][ ][Set ID][ ][OK/NG][Data1][Data2][x] 27. Automatic standby (Command: m n) Configures the automatic standby settings. Transmission [m][n][ ][Set ID][ ][Data][Cr] Data 00: Off (Will not turn off after 4/6/8 hours) 01: 4 hours (Off after 4 hours) 02: 6 hours (Off after 6 hours) 03: 8 hours (Off after 8 hours) Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] 28. Auto off (Command: f g) Configures the automatic off settings. Transmission [f][g][ ][Set ID][ ][Data][Cr] Data 00: Off (Will not turn off after 15 minutes) 01: On (Off after 15 minutes) Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] ENGLISH