LG 49SE3KE-B User Guide - Page 52
DPM Wake Up Control] Command: s n, 0b
View all LG 49SE3KE-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
ENGLISH 52 45. [DPM Wake Up Control] (Command: s n, 0b) Sets the DPM deactivation Control mode. Transmission (s)(n)( )(Set ID)( )(0)(b)( )(Data)(Cr) Data 00: S ets the clock mode 01: S ets the clock + data mode Acknowledgment (n)( )(Set ID)( )(OK/NG)(0)(b)(Data)(x) * This feature may not be available for all models. 48. [Fail Over] Mode (Command: m i) Sets an input mode for fail over. Transmission (m)(i)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: [Auto] 02: [User Setting] Acknowledgment (i)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 46. Remote Control/[Local Key Operation Lock] (Command: k m) Adjusts the remote control/local key (front) lock. Transmission (k)(m)( )(Set ID)( )(Data)(Cr) Data 00: O ff (Lock Off) 01: O n (Lock On) Acknowledgment (m)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 47. [Power On Delay] (Command: f h) Sets the schedule delay for when the power turns on. (Unit: seconds) Transmission (f)(h)( )(Set ID)( )(Data)(Cr) Data 00-FA: Min 0- Max 250 (sec) Acknowledgment (h)( )(Set ID)( )(OK/NG)(Data)(x) * The maximum value may differ depending on the model. * This feature may not be available for all models. 49. [Fail Over] Input Select (Command: m j) Selects an input source for fail over. (This feature is only available when Fail Over is set to Custom.) Transmission (m)(j)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)( )(Data4) ... ( )(DataN)(Cr) Data1-N (Input priority 1-N) 60: RGB 80: DVI-D 90: HDMI C0: Display Port 91: HDMI2/SDI/OPS 98: OPS Acknowledgment (j)( )(SetID)( )(OK/NG)(Data1)(Data2)(Data3)(Data4) ...(DataN) (x) * Some input signals may not be available for all models. * The data number (N) may vary depending on the model. (The data number depends on the number of supported input signals.) 50. Remote Control Key Lock (Command: t p) Configures the settings of the product's remote control key. Transmission (t)(p)( )(Set ID)( )(Data)(Cr) Data 00: Unlocks all keys 01: Locks all keys except Power key 02: Locks all keys Acknowledgment (p)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models.