LG 49VL5F-A Owners Manual - Page 81
Natural Mode] In Tile Mode Command: d j, Tile H Size Command: d g
View all LG 49VL5F-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
ENGLISH 39. [Natural Mode] (In Tile Mode) (Command: d j) To display the image naturally, the part of the image that would normally be displayed in the gap between the monitors is omitted. Transmission (d)(j)( )(Set ID)( )(Data)(Cr) Data 00: Off 01: On Acknowledgment (j)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 51 42. Tile H Size (Command: d g) Adjusts the H Size in Tile Mode. (Before adjusting the Tile H Size, set the Tile H Position as 0 X 32. This function is only available when Tile Mode is set to On and Natural Mode is set to Off.) Transmission (d)(g)( )(Set ID)( )(Data)(Cr) Data 00 - 32: 0 - 50 Acknowledgment (g)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 40. Tile H Position (Command: d e) Adjusts the H Position in Tile Mode. (This function is only available when Tile Mode is set to On and Natural Mode is set to Off.) Transmission (d)(e)( )(Set ID)( )(Data)(Cr) Data 00 - 32: - 50(Left) - 0(Right) * Left/Right values vary depending on the tile H Size. Acknowledgment (e)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 43. Tile V Size (Command: d h) Adjusts the V Size in Tile Mode. (Before adjusting the Tile V Size, set the Tile V Position as 0 X 00. This function is only available when Tile Mode is set to On and Natural Mode is set to Off.) Transmission (d)(h)( )(Set ID)( )(Data)(Cr) Data 00 - 32: 0 - 50 Acknowledgment (h)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 41. Tile V Position (Command: d f) Adjusts the V Position in Tile Mode. (This function is only available when Tile Mode is set to On and Natural Mode is set to Off.) Transmission (d)(f)( )(Set ID)( )(Data)(Cr) Data 00 - 32: 0 (Down) - 50(Top) * Vertical values vary depending on the tile V Size. Acknowledgment (f)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 44. [DPM] (Command: f j) Sets the DPM(Display Power Management) function. Transmission (f)(j)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: 5 seconds 02: 10 seconds 03: 15 seconds 04: 1 minute 05: 3 minute 06: 5 minute 07: 10 minute Acknowledgment (j)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models.