LG 49VM5C Owners Manual - Page 71
Power Command: k a, Select Input Command: x b, Aspect Ratio Command: k c, Energy Saving Command: j q
View all LG 49VM5C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
ENGLISH 38 01. Power (Command: k a) Controls the power on/off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] *The acknowledgement signal is returned properly only when the monitor is fully powered on. * There may be a delay between the transmission and acknowledgement signals. 02. Select Input (Command: x b) Selects an input signal. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 20: AV 40: COMPONENT 60: RGB 70: DVI-D (PC) 80: DVI-D (DTV) 90: HDMI1 (DTV) A0: HDMI1 (PC) 91: HDMI2/OPS (DTV) A1: HDMI2/OPS (PC) 92: OPS/HDMI3/DVI-D (DTV) A2: OPS/HDMI3/DVI-D (PC) 95: OPS/DVI-D (DTV) A5: OPS/DVI-D (PC) 96: HDMI3/DVI-D (DTV) A6: HDMI3/DVI-D (PC) C0: DISPLAYPORT (DTV) D0: DISPLAYPORT (PC) E0: SuperSign webOS Player E1: Others E2: Multi Screen Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] * Some input signals may not be supported depending on the model. ** If it is not distributed from SuperSign W, webOS Player returns NG. 03. Aspect Ratio (Command: k c) Adjusts the aspect ratio. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 01: 4:3 02: 16:9 04: Zoom 06: Set by Program 09: Just Scan (720p or higher) 10 to 1F: Cinema Zoom 1 to 16 21: 58:9 30: Vertical Zoom 31: All-Direction Zoom * Available data types differ depending on the input signal. For more information, see the aspect ratio section of the owner's manual. * The aspect ratio may differ depending on the model's input configuration. Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] 04. Energy Saving (Command: j q) Sets the Energy Saving. Transmission [j][q][ ][Set ID][ ][Data][Cr] Data 00: Off 01: Minimum 02: Medium 03: Maximum 04: Automatic 05: Screen off Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x] ** This may not be supported depending on the model. 05. Picture Mode (Command: d x) Selects a picture mode. Transmission [d][x][ ][Set ID][ ][Data][Cr] Data 00: Vivid 01: Standard 02: Cinema 03: Sports 04: Game 05: Expert 1 06: Expert 2 08: APS 09: Photos 10: Touch 11: Calibration Acknowledgement [x][ ][Set ID][ ][OK/NG][Data][x] * Depending on the model, some picture modes may not be supported.