LG 49XS4J-B Owners Manual - Page 107
Fail Over] Input Select Command: m j, Fail Over] Mode Command: m
View all LG 49XS4J-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
ENGLISH 39. [DPM] (Command: f j) Sets the DPM(Display Power Management) function. Transmission (f)(j)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 04: 1 minute 05: 3 minutes 06: 5 minutes 07: 1 0 minutes Acknowledgment (j)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 73 42. [Fail Over] Mode (Command: m i) Selects a sound mode. Transmission (m)(i)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: [Auto] 02: [User Setting] Acknowledgment (i)( )(Set ID)( )(OK/NG)(Data)(x) 40. Remote Control/Local Key Operation Lock (Command: k m) Adjusts the remote control/local key (front) lock. Transmission (k)(m)( )(Set ID)( )(Data)(Cr) Data 00: [Off] (Lock Off) 01: [On] (Lock On) * When the monitor is turned off, the power key works even in On (01) mode. Acknowledgment (m)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 41. [Power On Delay] (Command: f h) Sets the schedule delay for when the power turns on. (Unit: seconds) Transmission (f)(h)( )(Set ID)( )(Data)(Cr) Data 00-FA: Min 0- Max 250 (sec) Acknowledgment (h)( )(Set ID)( )(OK/NG)(Data)(x) * The maximum value may differ depending on the model. 43. [Fail Over] Input Select (Command: m j) Selects an input source for fail over. (This feature is only available when Fail Over is set to Custom.) Transmission (m)(j)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)( )(Data4) ... ( )(DataN)(Cr) Data1-N (Input priority 1-N) 60: RGB 70: DVI-D 90: HDMI1 91: HDMI2 92: OPS/HDMI3/DVI-D 95: OPS/DVI-D 96: HDMI3/DVI-D 97: HDMI3/HDMI2/DVI-D 98: OPS 99: HDMI2/OPS C0: DISPLAYPORT C1: DISPLAYPORT/USB-C C2: HDMI3 C3: HDBaseT Acknowledgment (j)( )(SetID)( )(OK/NG)(Data1)(Data2)(Data3)(Data4) ... (DataN)(x) * Some input signals may not be available for all models. * The data number (N) may vary depending on the model. (The data number depends on the number of supported input signals.) * This feature operates as the last input, and supports data in DTV format.