LG 50144812 Owners Manual - Page 10

Howto, Remove, Handles - door gasket

Page 10 highlights

2. Replacing Refrigerator Door • Right Door • Lower the door onto the middle hinge pin (7). • Make sure the door is aligned with the cabinet, , Replace the top hinge (4) installing hinge screws (3) to secure it, • Make sure the gasket on the door is flush against the cabinet and is not folded, • Support the door on the handle side while securing. And make sure the door is straight and the gap between the doors is even across the front. . Install the ground screw (6). , Connect the door switch wire (2), • Tighten the cover screw (1), • Left Door • Lower the door onto the middle hinge pin (5), • Make sure the door is aligned with the cabinet, • Replace the top hinge (4) installing hinge screws (3) to secure it, • Make sure the gasket on the door is flush against the cabinet and is not folded. • Support the door on the handle side while securing, And make sure the door is straight and the gap between the doors is even across the front, • Connect the door switch wire (2). • Tighten the cover screw (1), Note: To use like reference the previous image, HOWTO REMOVE DOOR HANDLES NOTE: Handle appearance may vary from illustrations on this page, 1. Removing Refrigerator Handle • Loosen the set screws (1) with the 3/32" Allen wrench and remove the handle (2), • Loosen the handle mounting fasteners (3) with the 1/4" Allen wrench. Set Screw Allen Wrench 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

2. Replacing
Refrigerator
Door
Right Door
Lower the door onto the middle hinge pin (7).
• Make sure the door is aligned with the cabinet,
,
Replace the top hinge (4) installing hinge
screws (3) to secure it,
• Make sure the gasket on the door is flush
against the cabinet and is not folded,
Support the door on the handle side while
securing. And make sure the door is straight
and the gap between the doors is even across
the front.
. Install the ground screw (6).
, Connect the door switch wire (2),
• Tighten the cover screw (1),
Left Door
Lower the door onto the middle hinge pin (5),
Make sure the door is aligned with the cabinet,
• Replace the top hinge (4) installing hinge
screws (3) to secure it,
• Make sure the gasket on the door is flush
against the cabinet and is not folded.
• Support the door on the handle side while
securing, And make sure the door is straight
and the gap between the doors is even across
the front,
• Connect the door switch wire (2).
• Tighten the cover screw (1),
Note:
To use like reference the previous image,
HOWTO
REMOVE
DOOR
HANDLES
NOTE:
Handle appearance
may vary from illustrations
on this page,
1. Removing
Refrigerator
Handle
Loosen the set screws
(1) with the 3/32" Allen
wrench and remove the handle (2),
Loosen the handle mounting
fasteners
(3)
with the 1/4" Allen wrench.
Set
Screw
Allen
Wrench
10