LG 50PC3DD-UE Owner's Manual - Page 9

Connecting an antenna or cable TV, Connecting a standard A/V device, Connecting an S-Video device

Page 9 highlights

07-287_NS-PDP50_English Only.fm Page 9 Wednesday, July 11, 2007 12:05 PM Insignia NS-PDP50 50" Plasma TV-720P Connecting an antenna or cable TV Analog and digital TV signals on a single cable To connect an antenna or cable TV: 1 Connect one end of a 75 ohm cable to the ANTENNA/CABLE IN jack on the back of your TV. Cable TV OR ANTENNA/ CABLE IN Connecting a standard A/V device To connect a standard A/V device: 1 Connect the video (yellow), right audio (red), and left audio (white) plugs on a standard A/V cable to the AV1 (back) or AV2 (side) jacks on your plasma TV. Side jacks shown Antenna 2 Connect the other end of the cable to the antenna or cable TV jack. Analog and digital TV signals on separate cables To connect an antenna or cable TV: OR ANTENNA/ CABLE IN Using a signal amplifier or two-way splitter You may need to install a signal amplifier or a two-way splitter if: • Reception is poor (use a signal amplifier). • Signal from the antenna needs to be split between two TVs (use a two-way splitter). L AUDIO R VIDEO 2 Connect the plugs on the other end of the cable to the corresponding jacks on the external device. 3 Turn on your plasma TV and the device. 4 Press INPUT one or more times to select AV1 or AV2. Connecting an S-Video device To connect an S-Video device: 1 Connect an S-Video cable to the S-VIDEO jack on the back or side of your plasma TV, then connect the other end of the cable to the S-Video out jack on the external device. ANTENNA/ CABLE IN Signal amplifier or two-way splitter www.insignia-products.com 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

9
Insignia NS-PDP50 50" Plasma TV-720P
www.insignia-products.com
Connecting an antenna or cable TV
Analog and digital TV signals on a single cable
To connect an antenna or cable TV:
1
Connect one end of a 75 ohm cable to the
ANTENNA/CABLE IN
jack on the back of
your TV.
2
Connect the other end of the cable to the
antenna or cable TV jack.
Analog and digital TV signals on separate cables
To connect an antenna or cable TV:
Using a signal amplifier or two-way splitter
You may need to install a signal amplifier or a
two-way splitter if:
Reception is poor (use a signal amplifier).
Signal from the antenna needs to be split
between two TVs (use a two-way splitter).
Connecting a standard A/V device
To connect a standard A/V device:
1
Connect the video (yellow), right audio (red),
and left audio (white) plugs on a standard
A/V cable to the
AV1
(back)
or
AV2
(side)
jacks on your plasma TV.
2
Connect the plugs on the other end of the
cable to the corresponding jacks on the
external device.
3
Turn on your plasma TV and the device.
4
Press
INPUT
one or more times to select
AV1
or
AV2
.
Connecting an S-Video device
To connect an S-Video device:
1
Connect an S-Video cable to the
S-VIDEO
jack on the back or side of your plasma TV,
then connect the other end of the cable to the
S-Video out jack on the external device.
ANTENNA/
CABLE IN
Cable TV
Antenna
OR
ANTENNA/
CABLE IN
OR
ANTENNA/
CABLE IN
Signal amplifier or
two-way splitter
R
L
AUDIO
VIDEO
Side jacks shown
07-287_NS-PDP50_English Only.fm
Page 9
Wednesday, July 11, 2007
12:05 PM