LG 55EF5F-L Owners Manual - Page 104
Natural Mode] In Tile Mode Command: d j, Remote Control/Local Key Operation Lock
View all LG 55EF5F-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
ENGLISH 36. [Tile Mode] Check (Command: d z) Checks the tile mode. Transmission (d)(z)( )(Set ID)( )(Data)(Cr) Data FF: C heck Tile Mode Acknowledgment (z)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x) Data1 00: Tile Mode off 01: Tile Mode on Data2 00-0F: Tile column Data3 00-0F: Tile row * This feature may not be available for all models. 75 39. [DPM] (Command: f j) Sets the DPM(Display Power Management) function. Transmission (f)(j)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 04: 1 minute 05: 3 minutes 06: 5 minutes 07: 1 0 minutes Acknowledgment (j)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 37. [Tile ID] (Command: d i) Sets the tile ID value of the product. Transmission (d)(i)( )(Set ID)( )(Data)(Cr) Data 01-E1: Tile ID 1-225 FF: Checks the Tile ID * The data value cannot exceed the value of row x column. Acknowledgment (i)( )(Set ID)( )(OK/NG)(Data)(x) * If you enter a value that exceeds the value of row x column for the Data parameter (except for 0xFF), Ack becomes NG. * This feature may not be available for all models. * If you change the values on a Video Wall model, please reboot for it to work normally. 40. Remote Control/Local Key Operation Lock (Command: k m) Adjusts the remote control/local key (front) lock. Transmission (k)(m)( )(Set ID)( )(Data)(Cr) Data 00: [Off] (Lock Off) 01: [On] (Lock On) * When the monitor is turned off, the power key works even in On (01) mode. Acknowledgment (m)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 38. [Natural Mode] (In Tile Mode) (Command: d j) To display the image naturally, the part of the image that would normally be displayed in the gap between the monitors is omitted. Transmission (d)(j)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (j)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 41. [Power On Delay] (Command: f h) Sets the schedule delay for when the power turns on. (Unit: seconds) Transmission (f)(h)( )(Set ID)( )(Data)(Cr) Data 00-FA: Min 0- Max 250 (sec) Acknowledgment (h)( )(Set ID)( )(OK/NG)(Data)(x) * The maximum value may differ depending on the model.