LG 55EF5F-P Owners Manual - Page 119
Scan Inversion] Command: s n
View all LG 55EF5F-P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
ENGLISH 90 99. [Scan Inversion] (Command: s n, 87) It controls the on/off status of Scan Inversion. Transmission (s)(n)( )(Set ID)( )(8)(7)( )(Data)(Cr) Data 00: Off 01: On Acknowledgment (n)( )(Set ID)( )(OK/NG)(8)(7)(Data)(x) * This feature may not be available for all models. * If you change the values on a Video Wall model, please reboot for it to work normally. 100. [Frame Control] (Command: s n, b7) It controls the Frame Control. Transmission (s)(n)( )(Set ID)( )(b)(7)( )(Data)(Cr) Data 00: Off 01: On Acknowledgment (n)( )(Set ID)( )(OK/NG)(b)(7)(Data)(x) * This feature may not be available for all models. * If you change the values on a Video Wall model, please reboot for it to work normally. 102. Read Brightness Value (Command: m u) Checks the brightness value. Transmission (m)(u)( )(Set ID)( )(FF)(Cr) Acknowledgment (u)()(SetID)()(OK/NG)(Data1)(Data2)(Data3)(Data4) (Data5)(Data6)(Data7)(x) Data 1 00~64: Backlight PWM figure 0-100 Data 2 00~ff: The upper 1-byte of the value measured by the CA210. Data 3 00~ff: The lower 1-byte of the value measured by the CA210. The CA210 measurement is Hex: 0000~ffff, Decimal: 0 - 65535 Data 4 00~ff: The upper 1-byte of the value measured by BLU 1 Sensor. Data 5 00~ff: The lower 1-byte of the value measured by BLU 1 Sensor Data 6 00~ff: The upper 1-byte of the value measured by BLU 2 Sensor Data 7 00~ff: The lower 1-byte of the value measured by BLU 2 Sensor The BLU measurement is Hex: 0000~ffff, Decimal: 0 65535 * The CA210 measurement is entered as "Calibration" when the product is released from the factory. It is Default 0 before the calibration. * This feature may not be available for all models. 101. [Average Picture Level Auto Control] (Command: s n, be) Sets Average Picture Level Auto Control. Transmission (s)(n)( )(Set ID)( )(b)(e)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(b)(e)(Data)(x) * This feature may not be available for all models. 103. [Screen Fault Detection] (Command: t z) Sets the Screen Fault Detection feature. Transmission (t)(z)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (z)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 104. [Stereo Mode] (Command: s n, c2) Controls Stereo Mode. Transmission (s)(n)( )(Set ID)( )(c)(2)( )(Data)(Cr) Data 00: Left/Right 01: Left/Left 02: Right/Right Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(2)(Data)(x) * This feature may not be available for all models.