LG 55EF5G-L Owners Manual - Page 127
Change Setid Command: j x, Black Level] Command: s n, ae
View all LG 55EF5G-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
ENGLISH 88. LCIN008 Control (Command: s n, b8) It controls the LCIN008 device. Transmission (s)(n)( )(Set ID)( )(b)(8)( )(Data1)(Data2)(Cr) Data 1 00: LCIN008 Power 01: LCIN008 Brightness Data 2 1. For Power 0 x 00: Off 0 x 01: On 2. For Brightness 0 x ff: Read 0 x 00 ~ 0 x 64: Applies a set value Acknowledgement (n)( )(Set ID)( )(OK/NG)(b)(8)(Data1)(Data2)(x) * This feature may not be available for all models. * Other commands do not work for a certain time after applying. 89. [Transfer Control] (Command: s n, cb) It transfers the command to RS232C out. Transmission (s)(n)( )(Set ID)( )(c)(b)( )(Data)(Cr) Data Data that goes out to RS232C out Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(b)(Data)(x) Data Response value of Data transferred to RS232C out * This feature may not be available for all models. * Other commands do not work for a certain time after applying. 91 91. Change Setid (Command: j x) Changes and checks Setid. 1. When it is a general LED model Transmission (j)(x)( )(Set ID)( )(Data1)( )(Data2)(Cr) Data1 Data2 : 00 01 ~ 03 e8 (1~1000) Acknowledgment (x)( )(Set ID)( )(OK/NG)(Data1)(Data2)(x) 2. When it is another model (read only) Transmission (j)(x)( )(Set ID)( )(Data)(Cr) Data FF: Check the value of Setid The returned value is indicated as a value of hexadecimal numbers corresponding to the ASCII code value. (Return when Setid is 1: x 01 OK31x Return when Setid is 1000: x 3e8 OK31303030x) Acknowledgment (x)( )(Set ID)( )(OK/NG)(Data)(x) * It works even if the Setid does not match. 92. [Gamma] (Command: s n, ad) Sets Gamma Mode. Transmission (s)(n)( )(Set ID)( )(a)(d)( )(Data)(Cr) Data 00: [low](1.9) 01: [medium](2.2) 02: [High1](2.4) 03: [High2](BT.1886) Acknowledgment (n)( )(Set ID)( )(OK/NG)(a)(d)(Data)(x) * This feature may not be available for all models. 90. Multichannel (Command: s n, 76) It changes the channel. Transmission (s)(n)( )(Set ID)( )(7)(6)( )(Data)(Cr) Data 01 - 09: Channel to switch to Acknowledgment (n)( )(Set ID)( )(OK/NG)(7)(6)(Data)(x) * This feature may not be available for all models. 93. [Black Level] (Command: s n, ae) It sets the Black Level mode. Transmission (s)(n)( )(Set ID)( )(a)(e)( )(Data)(Cr) Data 00: Low 01: High 02: Auto Acknowledgment (n)( )(Set ID)( )(OK/NG)(a)(e)(Data)(x) * This feature may not be available for all models.