LG 55EF5G-P Owners Manual - Page 70
Step 2: Con the [Network] (when using the video wall mode)
View all LG 55EF5G-P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
ENGLISH 33 NOTE •• For [Screen Protection Mode] to work in the video wall, the monitors must be connected to the same network on the LAN. However, some operations may be available when [LAN Daisy Chain] is connected and used. In this case, use a router or a network switch. •• How to check the connection: Check the IP address in (SETTINGS) [General] [Network] [Wired Connection (Ethernet)]. For more information, refer to Step 2: Configure the [Network]. Step 2: Configure the [Network] (when using the video wall mode) 1 Check the required equipment. •• Router or network switch router •• DHCP Server -- Used to allocate IP addresses in the network. Included in the router. -- Additionally required to configure the network with a network switch. •• Network cable (Ethernet cable) -- Used to connect the Ethernet port of the router (or network switch) and the Ethernet port of the Signage. 2 Check the network connection of the Signage. •• (SETTINGS) [General] [Network] [Wired Connection (Ethernet)] -- When the router is connected to the Internet: Make sure the connection status shows "Connected to Internet". -- When the router is not connected to the Internet: Make sure the connection status shows "No Internet via Ethernet". 3 Check the IP address of the Signage. •• Check the IP address in (SETTINGS) [General] [Network] [Wired Connection (Ethernet)].