LG 55LM8600 User Manual - Page 14

ENEGNLGISH 14 ASSEMBLING AND PREPARING CAUTION yyIf there is a Isolator, follow as shown. » Use this to install TV in a place where there is a voltage difference between TV set and GND of antenna signal. If there is a voltage difference between TV set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. » You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation. » Before starting, be sure that the TV antenna is connected. Wall ACNATBELNENINA/ or Connect to TV. Cable / Antenna Isolator Connect to Set-Top box. Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box. "Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)" When applying the RF Isolator, a slight loss of signal sensitivity can occur. Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. P AN-MR300 Magic remote control AG-F2**, AG-F3** Cinema 3D glasses AG-F2**DP, AG-F3**DP Dual play glasses The model name or design may be changed depending on the upgrade of product functions, manufacturer's circumstances or policies.