LG 60PM4M Owners Manual - Page 10

Introduction Remote Control Key Functions When using the remote control, aim it at the remote control sensor on the monitor. Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Press the key again as necessary. AV buttons Each time you press the Input but- ton it will change to AV -_ Component1 Component2_ RGB-_HDMI/DVI. SLEEP Sets the sleep timer. PSM Adjusts the factory preset picture according to the room, NUMBER buttons There is not a function which is supported. MENU Displays on screen menus one by one. Exits the current menu. Memorizes menu changes. MUTE Switches the sound on or off. SLEEP PSM ARC AUTO POWER switches standby. the set on from standby or off to _INPUT Selects the AV, Component, HDMI modes. RGB or switches the set on from standby. _AUTO Automatic adjustment function. (Operational for the analog signal only) _ARC Changes the picture format. _There is not a function which is supported. _EXIT Clears all on-screen displays and returns to monitor viewing from any menu. _SET laccepts your selection or displays the current mode. l-I /_- Volume Up/Down 11/v IAdjusts M--Selects menu settings. menu item. --. : No function Installing Batteries • Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -). • Install two 1.5V AAA batteries. Don't mix old or used batteries with new ones. Replace cover. 10 Plasma Monitor