LG 60PV450C Brochure - Page 2

Unlike other sensors which can only sense brightness of ambient light, LG's "Intelligent Sensor" uses 4,096 sensing steps to evaluate its surroundings. Using a sophisticated algorithm, the LG processes picture quality elements including brightness, contrast, color, sharpness and white balance. The result is a picture optimized for it's surroundings, more pleasing to watch and which can also save up to 50% in power consumption. ENERGY SAVINGS THREE MODE POWER SAVING LEVELS Manually select your choice for the brightness level for the television. By selecting Minimum, Medium, or Maximum, the power consumption will be reduced and an increase in energy savings can be achieved. 50PV450C in Vivid Mode 60PV450C in Vivid Mode POWER SAVING MODE Off Minimum Medium Maximum POWER CONSUMPTION* 272.8 Wh 240.3 Wh 190.8 Wh 135.0 Wh ENERGY SAVINGS** 0% 11.9% 30.0% 50.5% POWER SAVING MODE Off Minimum Medium Maximum POWER CONSUMPTION* 370.4 Wh 322.8 Wh 263.1 Wh 159.6 Wh ENERGY SAVINGS** 0% 12.8% 28.9% 56.9% NOTES: *Power consumption was measured with video signal - IEC62087 dynamic broadcast. **Percentages listed are based off of Energy Saving in the Off mode. (Test conditions - AC115V, Component Mode, Standard Mode, Intelligent Sensor Off, Volume 50mW@30(Vol. Level)) 600Hz The PV450C Series uses 600Hz Sub-field Driving which reacts very quickly to the changes on screen making fast action motion clearer. SUB-FIELD 1 SUB-FIELD 2 SUB-FIELD 3 SUB-FIELD 4 SUB-FIELD 5 SUB-FIELD 6 SUB-FIELD 7 SUB-FIELD 8 SUB-FIELD 9 SUB-FIELD 10 Public Display Settings Public Display Mode No Start Channel No Ch. Type TV Major 2 Minor 0 Minimum Volume 0 Maximum Volume 100 Start Volume No Level 20 Power Management No Setting 1 Key Management 0 Factory Reset 0 Aspect Ratio 0 PUBLIC DISPLAY SETTINGS (v2.5) When used in public areas, these HDTVs can be easily programmed by the installer to have the TV turn on at a specified channel/volume level, set the minimum/maximum volume, lock out the control panel/remote, set the aspect ratio, and return to a factory reset. By using Power Management, these displays can be programmed to turn off if there has been no activity (remote or control panel buttons) for a preset time (1-7) hours.