LG 65UR770H Owners Manual - Page 48

ENGLISH 21 Channel(Programme) block/unblock (Command:m d) ►►This command may work differently depending upon model and signal. ►►For South Korea, North/Latin America except Colombia Model Transmission (m)(d)( )([Set ID])( )(Data 00)( )(Data 01)( )(Data 02) (Data 03)(Data 04)(Cr) (Data 00): Physical Channel Number (Data 01)(Data 02): Major Channel Number -- (Data 01): High Channel data -- (Data 02): Low Channel data 00 00 ~ 27 0F (Decimal: 0 ~ 9999) (Data 03)(Data 04): Minor Channel Number -- (Data 03): High Channel data -- (Data 04): Low Channel data (Data 05): Input Source -- 02: Antenna TV (DTV) -- 06: Cable TV (CADTV) -- 0b: Cable DTV Plus (Data 06): block(01)/unblock(00) Ack (d)( )([Set ID])( )(OK/NG)(Data 00)(Data 01)(Data 02) (Data 03)(Data 04)(x) * Block/Unblock Command Examples Block/Unblock Cable DTV (DVB-T) Channel 18-2 ([Set ID]) = 01 (Data 00) = Physical Channel Number 18 = 12(HEX) (Data 01) & (Data 02) = Major Channel Number is 18 = 00 12(HEX) (Data 03) & (Data 04) = Major Channel Number is 2 = 00 02(HEX) (Data 05) = cable DTV = 06 (Data 06) = block(01)/unblock(00) Result: md 01 12 00 12 00 02 06 (01/00) 22 Fail Over Mode (Command: m i) ►►Selects the Fail Over mode. Transmission (m)(i)( )([Set ID])( )(Data)(Cr) Data 00: Off Data 01: Auto Data 02: Manual Ack (i)( )([Set ID])( )(OK/NG)(Data)(x) 23 Fail Over Input Select (Command: m j) ►►Selects an input source for fail over. (This feature is only available when Fail Over is set to Custom.) Transmission (m)(j)( )([Set ID])( )(Data1)( )(Data2)( )(Data3)( ) (Data4)...( )(DataN)(Cr) Data 1-N (Input priority 1-N) Data 20: AV1 Data 21: AV2 Data 22: AV3 Data 90: HDMI1 Data 91: HDMI2 Data 92: HDMI3 Data 93: HDMI4 Ack (j)( )([Set ID])( )(OK/NG)(Data1)(Data2)(Data3) (Data4)...(DataN)(x) * Some input signals may not be available for all models. * The data number (N) may vary depending upon the model. (The data number depends on the number of supported input signals.) 36