LG 75XS4G-B User Guide - Page 88
LED Local Dimming] Command: s n, c6, HDR Picture Mode] Command: s n, c4
View all LG 75XS4G-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
88 ENGLISH 102. Read Brightness Value (Command: m u) Checks the brightness value. Transmission (m)(u)( )(Set ID)( )(FF)(Cr) Acknowledgment (u)()(SetID)()(OK/NG)(Data1)(Data2)(Data3)(Data4) (Data5)(Data6)(Data7)(x) Data 1 00~64: Backlight PWM figure 0-100 Data 2 00~ff: The upper 1-byte of the value measured by the CA210. Data 3 00~ff: The lower 1-byte of the value measured by the CA210. The CA210 measurement is Hex: 0000~ffff, Decimal: 0 - 65535 Data 4 00~ff: The upper 1-byte of the value measured by BLU 1 Sensor. Data 5 00~ff: The lower 1-byte of the value measured by BLU 1 Sensor Data 6 00~ff: The upper 1-byte of the value measured by BLU 2 Sensor Data 7 00~ff: The lower 1-byte of the value measured by BLU 2 Sensor The BLU measurement is Hex: 0000~ffff, Decimal: 0 65535 * The CA210 measurement is entered as "Calibration" when the product is released from the factory. It is Default 0 before the calibration. * This feature may not be available for all models. 103. [Screen Fault Detection] (Command: t z) Sets the Screen Fault Detection feature. Transmission (t)(z)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (z)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 104. [Stereo Mode] (Command: s n, c2) Controls Stereo Mode. Transmission (s)(n)( )(Set ID)( )(c)(2)( )(Data)(Cr) Data 00: Left/Right 01: Left/Left 02: Right/Right Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(2)(Data)(x) * This feature may not be available for all models. 105. [HDR Picture Mode] (Command: s n, c4) Selects a HDR Picture Mode. Transmission (s)(n)( )(Set ID)( )(c)(4)( )(Data)(Cr) Data 00: Mall/QSR 01: General 02: Gov./Corp. 04: Education Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(4)(Data)(x) * Depending on the model, some picture modes may not be supported. * It works only when the HDR content is running. 106. [Dynamic Tone Mapping] (Command: s n, c5) Selects Dynamic Tone Mapping. Transmission (s)(n)( )(Set ID)( )(c)(5)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(5)(Data)(x) * Depending on the model, some picture modes may not be supported. * It works only when the HDR content is running. 107. [LED Local Dimming] (Command: s n, c6) Sets the LED Local Dimming. (A feature to set the LED Local Dimming in a sub-item under [Settings] [Display] [Picture Mode] [Picture Options]) Transmission (s)(n)( )(Set ID)( )(c)(6)( )(Data)(Cr) Data 00: [Off] 01: [low] 02: [Medium] 03: [High] Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(6)(Data)(x) * This feature may not be available for all models.