LG 75XS4G-B Owners Manual - Page 87
Picture ID
View all LG 75XS4G-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
ENGLISH 52 Picture ID AUDIO (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT [Picture ID] is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with RS-232CIN RS-232C IN RS-232C IN an IR receiver and other monitors using RS-232C cables. Each REMOTE CONTROL IN monitor is identified by a Set ID. Setting [Picture ID] allows you to only use the remote control with monitors with a [Set ID] that matches the [Picture ID]. 1 Assign [Set ID] to the installed monitors as shown below: 2 Press the red [Picture ID] [On] button on the remote control. 3 Make sure that the Picture ID you set is identical to the [Set ID] of the monitory you wish to control. •• A set with a [Set ID] that is different from the [Picture ID] cannot be controlled by IR signals. NOTE •• If [Picture ID] has been set to 2, only the upper right monitor, which has a [Set ID] of 2, can be controlled by IR signals. •• If you press the green [Picture ID] [Off] button on your remote control, the [Picture ID] for all monitors are turned off. If you then press any button on the remote control, all monitors can be controlled by IR signals regardless of their [Set ID]'s.