LG A905RM Owners Manual - Page 13
Before Using, Attaching the Wand and, Accessories
View all LG A905RM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Operation Before Using • The dust bin lid must be in place before using the product. Otherwise, the suction strength will deteriorate and cleaning will not be satisfactory. • Support the bottom of the product when cleaning an elevated surface. • Store the vacuum in the charging station or flat on the floor when not in use. Leaning the vacuum against a wall or chair can result in product damage or personal injury if the vacuum falls. • Make sure that the exhaust filter is properly assembled before using the product. • Environmental conditions such as temperature and humidity may cause occasional static buildup to accumulate on the product. If this is a persistent issue, contact an LG Electronics customer information center. • Any foreign object on the inlet port or extension pipe will prevent the product from functioning properly. Make sure to remove any foreign object such as a sock or stocking before using the product. • The battery runtime will be shortened after using the product repeatedly for an extended period due to its characteristics. • After extended use, all batteries experience reduced battery life. • The last bar on the battery indicator begins to flash when the battery needs to be recharged. • Please use the product at normal room temperatures as the battery runtime will deteriorate severely if used at temperatures lower than 41°F (5°C) or higher than 100°F (38°C) for an extended period of time. • Refer to product specifications for battery run time details. • These times are a guide only and may be shorter for some surfaces. • Follow manufacturer's recommendations when cleaning flooring, carpets, and rugs. • To avoid marking polished flooring, keep the nozzle and brushes free from grit, sand, or abrasive objects. • To maintain battery life on dual-battery models, swap the positions of the two batteries periodically, between the main body and the auxiliary charging station. Attaching the Wand and Accessories 1 Attach the wand by sliding it onto the inlet on the product body until it clicks into place. To detach the wand, press the release button. Attach or detach the accessories to the end of the wand in the same way. Insert the battery into the cavity at the back of the vacuum. Inlet port Extending wand Product body Battery 2 To extend the wand, press the button on the back of the wand and slide the outer pipe until it clicks into place at the desired length. The wand extends in four steps. Wand length extension button 3 Accessories can be attached to either the extending wand or the product body. Extending wand CAUTION • Do not use attachments to clean TVs, LCDs, or monitors as they may scratch these surfaces. • Keep fingers away from pinch points when assembling the wand or attachments. • If any foreign object is sucked into the inlet during cleaning, operation of the vacuum cleaner might stop in order to prevent damage to the body or motor. Immediately stop using the vacuum cleaner and remove the object before resuming cleaning. 13