LG A913BM Owners Manual - Page 12
Installing the Charging, Station
View all LG A913BM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 INSTALLATION Installing the Charging Station CAUTION • Do not allow children or pets to hang onto the charging station. They could be injured or cause damage to the appliance. • Take care not to drop the product parts while unpacking them to avoid appliance damage or personal injury. GU NOTE • The cost of a service call to install or reinstall the charging station is not covered under the warranty. Wall-Mounted Installation For wall-mounted installations, the charging station must be attached securely to the wall using the provided (short) wall anchoring screws. • The detachable nozzle storage cannot be attached to the charging station in a wallmounted installation. CAUTION • Do not use double-sided tape to attach the charging station to wallpaper. The weight of the charging station and the product body could damage the paper. • Use the stand anchoring screw on concrete or solid walls. If the appliance is not anchored securely and falls, it could result in damage to property or the product. 1 Connect the power adapter to the port on the back of the charging station. 2 Drill 2 holes and insert the drywall anchors (if needed) at least 3.25 ft (1 m) from the floor and near enough to easily reach a power outlet. • Before drilling, make sure that there are no pipes or electrical wires inside the wall at the desired location. • For drywall anchor: use 1/4″ (6.5 mm) drill bit • For concrete or wall stud: use 1/8″ (3 mm) drill bit • If screwing into drywall, use the drywall anchors. 3 Attach the charging station to the wall with the wall anchoring screws. 4 Plug the power cord into the power outlet. Self-Standing Installation Follow the steps below to install the charging station on a hard and level floor. WARNING • To prevent tipping, self-standing mode installations should be anchored to the wall using the provided stand anchoring screw, anchoring block and double-sided tape. CAUTION • Do not use double-sided tape to attach the charging station to wallpaper. The weight of the charging station and the product body could damage the paper. • Use the stand anchoring screw on concrete or solid walls. If the appliance is not anchored securely and falls, it could result in damage to property or the product.