LG A925KSM Owners Manual - Page 19
Using the Mop Nozzle
View all LG A925KSM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Using the Mop Nozzle Before Use • You cannot adjust the rotation speed of the mop plates on the mop nozzle. • To prevent product damage, the mop plate will automatically stop if there are foreign objects stuck in the plate or if it is subjected to a strong impact. Turn the appliance off immediately and remove the foreign objects or obstructions before resuming use. • If you hear a noise while mopping, the mop pad may have dropped off the mop plate. Turn off the product immediately and reattach the pad to the mop plate before resuming use. • Do not use a soiled mop pad to clean floors. • Set the water adjustment button to the STOP position before carrying the appliance around with the mop nozzle attached. • Use only authorized LG Electronics mop pads. • Take care not to accidentally hit the Water Adjustment button at the rear of the mop nozzle while cleaning around chairs or table legs. The water supply level could change or be turned to off. Using the Mop Nozzle This accessory is only available on some models. When the mop nozzle is attached, the suction is turned off and only the mop function operates. Press the Power t button to turn the mop on/off. • The rotation speed of the mop plates is constant and cannot be adjusted. CAUTION • Do not assemble or disassemble the nozzle while the appliance is turned on. Doing so may result in injury. • Set the water adjustment button to the STOP position when not using the appliance for an extended period of time. Failure to do so may result in product failure. • Do not let the appliance stand on the floor while the wet mop pads are attached. Doing so may result in damage or swelling to wood flooring. • Do not use on PVC or polyurethane mats for infants or children. Friction can cause the motor to overheat. OPERATION 19 NOTE • If you use the mop nozzle for a long time, the motor may overheat. (Recommended maximum run time is 80 minutes.) If the motor overheats, a safety function is activated and the appliance automatically turns off. Set the appliance in a cool, well-ventilated place and allow it to cool down for about an hour before resuming use. Filling the Water Tank Before mopping, you must fill the water tank and attach it to the mop nozzle. 1 Press the PUSH button a to remove the water tank from the mop nozzle. 2 Open the water inlet cap b on the side of the water tank and fill the tank with water using the water tank filler c. • Open only one water inlet cap to fill the water. Opening both caps may cause the water to flush. • Do not fill the tank over the MAX line d. • Do not use detergent or any liquid other than water in the water tank. • The tank can be filled from either end. 3 Close the water inlet cap tightly. • If the water inlet cap is not closed properly, water may leak. ENGLISH