LG AG-S110 User Manual - Page 4
Charging The Glasses, Troubleshooting
View all LG AG-S110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
ENGLISH Charging the glasses 1 Connect the USB port located under the power button on the glasses to the USB port of the TV or PC using the supplied 8-pin mini USB cable as shown by the figure. 2 Charge the glasses until the LED is green. The glasses will fully charge in about 2 hours. ! note ▶▶While charging: The LED is red. ▶▶When charging is complete: The LED is green. ▶▶When the battery is discharged: The LED blinks for 1 minute and turns off automatically. ! Caution ▶▶If you use a USB cable other the one (8-pin mini USB) supplied with the product, the product may be damaged. Troubleshooting Problem Q. The glasses do not work. Suggestion A. The battery (Lithium Polymer) may be discharged, charge the battery with the 8-pin mini USB cable. A. Check that the distance between the TV and your 3D glasses is less than 23 ft (7 m) in a straight line. A. Check the 3D function settings of your TV. A. This occurs when the battery (Lithium Polymer) is discharged. Q. The LED blinks continuously. In this case, charge the battery with the supplied 8-pin mini USB cable. Q. I charged the glasses with the 8-pin mini USB cable, but it is not charged. A. Check if the 8-pin mini USB cable is properly connected to the product. 4