LG AN170 Owners Manual - Page 24

Getting Started with Your Phone Getting Started with Your Phone of the LCD screen. When the charge level becomes low, the battery sensor sounds a warning tone, blinks the battery icon, and/ or displays a warning message. As the charge level approaches empty, the phone automatically switches off without saving. Signal Strength Call quality depends on the signal strength in your area. You can tell how much signal strength you have by the number of bars next to the signal strength icon : the more bars, the stronger the signal. If you're having problems with signal quality, move to an open area or, when inside a building, try moving near a window. Turning the Phone On and Off Turning the Phone On 1. Insert the battery and connect the phone to an external power source if the battery level is low. 2. With the flip open, press the PWR/END Key until the LCD screen lights up. Turning the Phone Off With the flip open, press and hold the PWR/END Key until the LCD screen turns off. Making Calls 1. Make sure the phone is turned on. If not, open the flip and press the PWR/END Key for about three seconds. If necessary, enter the lock code. 2. Enter the phone number. 3. Press the SEND Key to dial the call. 4. Press the PWR/END Key to end the call. Note Your phone has a Voice Commands feature that also lets you make calls by saying a phone number or Contact name. Correcting Dialing Mistakes While entering a phone number, press the CLR Key once to erase the last digit entered, or hold it down for at least two seconds to delete all the digits. 22