LG ARNU153TEC2 Owner's Manual - Page 9

ENGLISH Forced Operation(TE only) Operation procedures when the remote control can't be used. Press the tact switch (Forced operation) for 2 seconds. If you want to stop operation, press again the tact switch. In case the power comes on again after power failure on the Forced Operation mode, the operating conditions are automatically set as follows: During Forced Operation, the initial mode continues. Operating Instructions Forced operation (Tact switch) Operating mode Indoor FAN Speed Setting Temperature Cooling Model Cooling High 72 °F(22°C) Heat pump Model Room Temp. ≥ set Temp.4 °F(2°C) Room Temp. < set Temp.4 °F(2°C) Cooling Heating set available set available set available set available In case of connecting the simple wired remote controller, plasma image is not displayed you press the forced operation button. Auto Restart Function In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate procedures automatically to the previous operating conditions. Tips for Filter sign LED 1. Filter sign lamp (LED) is ON. 2. If LED indicating filter sign lamp is ON, clean the filter. 3. After cleaning the filter, press the Timer button and ◀ button of wired remote controller at the same time for 3 sec. Then filter sign LED is OFF. Ownerʼs Manual 9