LG ARNU183VJA2 Owner's Manual - Page 11
Forced Operation, Auto Restart Function, Tips for Filter sign LED
View all LG ARNU183VJA2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH Operating Instructions Forced Operation Operation procedures when the remote control can't be used. Press the tact switch (Forced operation) for 2 seconds. If you want to stop operation, press again the tact switch. In case the power comes on again after power failure on the Forced Operation mode, the operating conditions are automatically set as follows: During Forced Operation, the initial mode continues. Operating mode Indoor FAN Speed Setting Temperature Cooling Model Cooling High 72 °F(22°C) Forced operation� (Tact switch) Heat pump Model Room Temp. ≥ set Temp.4 °F(2°C) Room Temp. < set Temp.4 °F(2°C) Cooling Heating set available set available set available set available Auto Restart Function In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate procedures automatically to the previous operating conditions. Tips for Filter sign LED 1. Filter sign lamp (LED) is ON. 2. If LED indicating filter sign lamp is ON, clean the filter. 3. After cleaning the filter, press the Timer button and ◀ button of wired remote controller at the same time for 3 sec. Then filter sign LED is OFF. Ownerʼs Manual 11